Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Metal Roof Installation Cost in Fort Lauderdale?
Metal roof installation in Fort Lauderdale typically costs between $14,500 and $38,000 for a standard single-family home, with most homeowners paying around $22,000 for a 1,800-square-foot standing seam roof. On a per-square-foot basis, you’re looking at $7.50 to $15.50 installed, depending on the metal type, panel profile, and how much tear-off work your existing roof requires. These are 2026 numbers for Broward County, and they account for the wind-load engineering and corrosion-resistant materials this coastal market demands.
Metal Roof Installation Cost Breakdown (2026)
Here’s what a typical Fort Lauderdale metal roof job looks like line by line. These ranges reflect what we see on real bids across Broward County in 2026, not national averages that ignore South Florida’s wind codes and salt-air environment.
| Cost Component | Typical Range (Fort Lauderdale, 2026) | Notes |
|---|---|---|
| Standing seam metal panels (24-gauge steel) | $9.50 – $14.00 per sq. ft. installed | Includes panel forming, fasteners, and factory paint finish |
| Metal shingles / stone-coated steel | $8.00 – $12.50 per sq. ft. installed | Popular in HOAs that restrict standing seam profiles |
| Aluminum panels (26-gauge) | $10.00 – $15.50 per sq. ft. installed | Higher material cost, but superior corrosion resistance near the coast |
| Tear-off and disposal of existing roof | $1.50 – $3.00 per sq. ft. | Higher if there are multiple layers or rotted decking below |
| Decking repair / replacement | $2.00 – $4.50 per sq. ft. (as needed) | Common in older Fort Lauderdale homes with water-damaged plywood |
| Underlayment (peel-and-stick or synthetic) | $0.75 – $1.75 per sq. ft. | Required by Miami-Dade and Broward HVHZ code for most builds |
| Flashing, trim, and ridge vents | $1,800 – $3,200 total | Includes custom-bent flashing for hips, valleys, and penetrations |
| Permits and wind-load engineering | $600 – $1,400 total | Broward County requires product approvals and uplift calcs |
| Insulated roof panel upgrade (optional) | +$2.00 – $3.50 per sq. ft. | Improves cooling efficiency and indoor noise reduction during downpours |
A 2,200-square-foot home in Victoria Park or Coral Ridge with a simple hip roof and healthy decking will usually land between $18,000 and $26,000 all-in. A 1,200-square-foot mid-century bungalow in Poinsettia Heights might run $10,000 to $14,000. A larger 3,500-square-foot two-story in Rio Vista with multiple valleys, a flat-roof section, and rotted decking can push past $40,000. The single biggest variable is whether your home can be stripped in a day or whether the crew finds structural surprises once the old roof comes off.
What Affects Metal Roof Installation Pricing in Fort Lauderdale
National metal roof calculators are nearly useless here. Fort Lauderdale has price drivers that roofers in, say, Orlando or Tampa simply don’t deal with. Here’s what actually moves the number on your bid.
- High-Velocity Hurricane Zone (HVHZ) code requirements. Broward County sits in the HVHZ, the strictest wind-load zone in the country. Metal panels, fasteners, and underlayment must carry state product approvals and meet uplift ratings for 175+ mph design wind speeds. Those materials cost 10% to 25% more than the same roof installed in central Florida. There’s no skipping this. Your permit won’t clear without it.
- Battens, counter-battens, and the underlayment system. Fort Lauderdale installs require either a peel-and-stick modified bitumen base or a high-grade synthetic underlayment under the metal. On a 2,000-square-foot roof, that’s $1,500 to $3,500 just in material nobody ever sees. Roofers who quote “cheap” metal roofs often skip this layer, and you’ll find out the first time a summer storm drives water sideways under the panels.
- Roof geometry and accessibility. A simple 6:12 hip roof in Harbordale is fast to panel. A complicated 40-year-old home in Sailboat Bend with three gables, a screened porch tie-in, and a low-slope section over the carport requires custom flashings, multiple panel terminations, and more labor hours. Every valley and transition adds $800 to $1,500 in fabrication and trim work.
- Distance from the coast and corrosion requirements. If you’re within a mile of the beach, aluminum or a marine-grade finish on steel is the right call. Aluminum panels run $10 to $15.50 per square foot versus $9.50 to $14 for standard Galvalume or pre-painted steel. You’ll also want stainless steel fasters rather than zinc-coated, which adds about $300 to $600 on an average roof.
- Tear-off vs. roof-over. Fort Lauderdale code allows a roof-over in some situations, but only when there’s a single layer of shingles underneath and the decking is sound. A roof-over saves $1.50 to $3.00 per square foot, but it hides decking problems, adds dead load, and shortens the life of the fasteners. Most reputable contractors in this market recommend full tear-off, and we agree. You want to see the deck before metal goes over it.
- Time of year. Metal roof quotes in Fort Lauderdale are cheapest between November and February, when the afternoon thunderstorm cycle quiets down and crews can work longer days. Spring and summer quotes often come in 5% to 10% higher because installers build afternoon rain delays and heat-related slowdowns into their labor estimates. If you can schedule for December or January, you’ll usually get better pricing and a faster crew.
Metal Roof Cost vs. Asphalt Shingles in Fort Lauderdale
Metal runs about two to three times the upfront cost of architectural shingles. A standard asphalt roof in Fort Lauderdale runs $5.00 to $7.50 per square foot installed versus $7.50 to $15.50 for metal. On a typical 2,000-square-foot home, that’s $10,000 to $15,000 for shingles versus $16,000 to $31,000 for standing seam.
But the math changes when you stay in the house. A quality asphalt roof in this climate lasts 12 to 18 years before the UV and humidity eat through it. A properly installed standing seam roof lasts 40 to 60 years. Over a 40-year window, you’ll likely buy two to three shingle roofs for every one metal roof. Metal also reflects more solar heat, which cuts cooling loads in the summer. Fort Lauderdale homeowners with metal roofs routinely report air conditioning savings of 10% to 25% during July and August, when FPL rates peak and your AC runs nonstop.
Insurance and Resale Angle
Broward County insurers have tightened underwriting since the last few hurricane seasons. Many carriers now offer lower windstorm premiums for metal roofs with HVHZ product approvals, and some will not write new policies at all for homes with shingle roofs over 15 years old. Metal’s impact resistance also means fewer post-storm claims. When a hail or wind event does come through, a metal roof shrugs off damage that would total a shingle roof. That’s a real financial consideration in Fort Lauderdale, not a theoretical benefit. And when it’s time to sell, a standing seam roof with transferable warranties is one of the few upgrades that appraisers actually credit at resale.
How to Save on Metal Roof Installation
You don’t save money on a metal roof by hiring the cheapest bidder. You save money by getting the scope right, the timing right, and the materials right the first time. Here’s what actually works in this market.
- Plan for the off-season. November through February is the sweet spot. Contractors in Fort Lauderdale are hungrier, the weather is dry and cool, and you’ll often shave $1,500 to $3,000 off an identical summer job.
- Keep the existing roof if it qualifies. If your home has only one layer of shingles and the decking is solid, a roof-over install can cut 15% to 20% from the bill. Just make sure the roofer pulls up a few sections and shows you photos of the deck before you commit to this route.
- Choose 24-gauge steel over heavier gauges. Unless you have a specific engineering reason for thicker panels, 24-gauge is the workhorse for South Florida residential. You’ll save $0.75 to $1.25 per square foot versus 22-gauge without giving up any meaningful performance.
- Simplify your roofline at the time of replacement. If you’re already spending $25,000 on a roof, closing off a problem valley or removing an unused vent for $800 to $1,500 can create a stronger roof that’s cheaper to maintain for decades. That’s savings on the back end.
- Get the deck inspected before you commit. The fastest way to blow past your metal roof budget is discovering rotted plywood after the tear-off starts. Ask any roofer in Fort Lauderdale to inspect the attic and give you a written decking condition report before signing. At Crestview, this happens as part of the estimate, with photos included.
Is Metal Roofing Worth the Cost in Fort Lauderdale?
For most Fort Lauderdale homeowners planning to stay in the home for 10 years or more, yes. The math is close even on a 10-year horizon once you factor in insurance savings, reduced maintenance, and the fact that a 30-year-old metal roof still has decades of life left while a 30-year-old shingle roof is a liability at inspection time.
We’re honest about this because a roofer in this market who pushes every customer toward metal is not doing them any favors. If you’re in the house for five years, you’ll likely never recoup the premium. If you’re in it for 15 or 20 years, metal is often the smarter money and always the more resilient option. The decision comes down to how long you plan to own the home and whether you consider a roof a maintenance line item or a long-term asset. In Fort Lauderdale, with the humidity, the UV, and the annual hurricane season, metal is the product that wins the long game.
Metal Roof Installation Cost FAQ – Fort Lauderdale, FL
How much does a metal roof cost per square foot in Fort Lauderdale?
Installed metal roofs run $7.50 to $15.50 per square foot, with standing seam steel landing around $9.50 to $14.00 and aluminum running $10.00 to $15.50. This includes panels, underlayment, fasteners, flashing, and labor. It does not include tear-off, which adds $1.50 to $3.00 per square foot. Call (754) 354-8628 for a written price on your exact roof.
Is a metal roof cheaper than shingles in the long run?
Yes. Even though the upfront cost is roughly double, a standing seam metal roof lasts 40 to 60 years in Broward County while shingles last 12 to 18. Over 40 years, you’ll likely replace shingles two to three times. Metal also cuts cooling costs 10% to 25% during Fort Lauderdale summers and often earns lower windstorm insurance premiums.
How much does a 1,800 sq. ft. metal roof cost in Fort Lauderdale?
For a standard 1,800-square-foot home with a simple roofline and sound decking, expect to pay $16,000 to $28,000 installed and permitted. If the home is within a mile of the ocean and requires aluminum panels and marine-grade fasteners, the range shifts to $18,000 to $31,000. Get a free estimate by calling (754) 354-8628.
Can you install a metal roof over existing shingles in Fort Lauderdale?
Yes, if there’s only one layer of shingles and the decking passes inspection. Broward County code permits roof-overs under those conditions, and it saves $1.50 to $3.00 per square foot compared to a full tear-off. However, a roof-over hides any decking rot and shortens fastener lifespan. We’ll inspect first and show you what’s underneath before recommending either path.
How long does a metal roof installation take in Fort Lauderdale?
Most residential metal roofs take 3 to 7 working days once materials arrive. Tear-off accounts for a full day on most homes, and custom trim fabrication can add another day when the roofline has multiple valleys and penetrations. Afternoon summer thunderstorms can stretch this by a day or two. You’ll get a clear schedule in writing before work starts.
Does a metal roof lower my homeowners insurance in Florida?
It can. Many underwriters in Broward County offer windstorm premium discounts for metal roofs that carry HVHZ product approvals, especially standing seam systems with good uplift ratings. The discount varies by carrier and home, but 10% to 20% off the windstorm portion of the premium is common. Your insurance agent can give you exact numbers once the roof is permitted and final-inspected.
Get a Written Metal Roof Quote in Fort Lauderdale
Dylan Pace and the Crestview Roofing Co Fort Lauderdale team install standing seam, metal shingle, and stone-coated steel roofs throughout the Fort Lauderdale area, including Victoria Park, Rio Vista, Coral Ridge, Harbordale, Sailboat Bend, Poinsettia Heights, and the beachside neighborhoods. Every quote includes a written price before any work starts, a detailed scope of work, and the home services transparency we’ve built our reputation on since 2000.
If you’re weighing metal against shingles or trying to decide between standing seam and stone-coated steel, call (754) 354-8628. A live person answers 24/7. We’ll walk you through the options, talk real numbers for your roof, and leave you with the same clarity our Metal Roof Installation in Fort Lauderdale page describes. No four-hour windows, no quotes that move at the door, and no surprises after the job.
Pricing reflects the Fort Lauderdale market as of 2026. Crestview Roofing Co Fort Lauderdale offers free estimates – call (754) 354-8628.
Written by Dylan Pace, Owner at Crestview Roofing Co Fort Lauderdale, serving Fort Lauderdale since 2000.
What Our Customers Say
"Leak near the chimney. They resealed the flashing and I got before and after photos by text."
- Troy N."Booked an inspection online and got a text with the inspector's name and ETA. He sent photos from the roof. Showed me the lifted shingles and fixed them the next day."
- Matt B."Roof replacement. Crew texted the schedule daily and I could ask questions by message. Done in two days."
- Sandra J.