Tamko Roof Installation Nationwide

Tamko Roof Installation in Fort Lauderdale: What to Know First

Tamko roof installation in Fort Lauderdale typically runs $9,800 to $22,400 for a full replacement, depending on the shingle line and roof complexity. As an independent Tamko service provider, we install Heritage, Titan XT, and StormShield systems, and most full re-roofs take three to five working days once materials land. Our installs come with a written line-item price before the first shingle comes off, a 365-day workmanship warranty on repairs, and the manufacturer’s material warranty registered in your name.

Call (754) 354-8628

If you own a Tamko roof that needs replacement or new installation, this page covers what we see in Fort Lauderdale, what it costs, and how our process works. Call (754) 354-8628 for a free estimate.

How Tamko Products Fail – and How We Fix Them

Every shingle brand fails differently in South Florida humidity and storm cycles. Here’s what we see specifically on Tamko roofs across Fort Lauderdale neighborhoods like Victoria Park, Rio Vista, and Coral Ridge.

• Heritage shingle granule loss on south-facing slopes. Tamko’s Heritage line uses a fiberglass mat with ceramic-coated granules, but Fort Lauderdale’s UV index is brutal. After 12 to 15 years, we see heavy granule shedding on slopes that face the midday sun. That granule loss exposes the asphalt below, which accelerates cracking. We fix it by inspecting the entire slope, not just the obvious bald spots, and replacing affected sections before water finds the underlayment.
• Titan XT lifting at the nail line during coastal wind events. Titan XT is a heavier shingle rated for higher winds, but the nail line placement means installation errors show up fast in Fort Lauderdale’s afternoon thunderstorms. We regularly see shingles that were nailed too high on the strip, outside the reinforced nail zone, which lets wind get underneath. Our crews re-nail using Tamko’s specified six-nail pattern for high-wind zones and check every course with a flat bar before moving up the roof.
• StormShield underlayment peeling at eaves after poor deck prep. Tamko’s StormShield is designed for leak-barrier protection at eaves and valleys, but it bonds poorly to a deck that hasn’t been cleaned of sawdust, nail heads, or old roofing cement. We prep the deck with a magnetic sweep and blow-down before rolling anything out, which fixes the adhesion problem before it becomes a leak.
• Cracked ridge cap shingles from undersized fasteners. Tamko ridge caps are thicker than field shingles, and when a crew uses the same nails for the cap as they do for the field, the cap can crack at the nail head. We upsize fasteners on every Tamko cap and hand-seal exposed nail heads with a color-matched asphalt cement.
• Warranty denials from non-Tamko accessories. Here’s the one a lot of homeowners don’t hear until it’s too late: Tamko’s limited material warranty assumes Tamko ridge caps, starter strips, and underlayment are used. Some Fort Lauderdale companies quote a Tamko field shingle but switch to generic accessories to shave the bid. We spec the full Tamko system on every install, so there’s no argument with the manufacturer later.

Our Tamko Roof Installation Process

Dylan Pace grew up in Los Angeles and learned his first roofing fundamentals at Los Angeles Trade-Technical College before spending nearly two decades on real jobs. He and our crew have been installing Tamko roofs in Fort Lauderdale long enough to know that a clean process beats a fast one every time. Here’s exactly how a Tamko install goes with us.

1. 1
   Walkthrough and measurements. We inspect the existing deck, get exact square footage, check attic ventilation, and look at every transition point: valleys, chimneys, skylights, and wall flashings. You get a written line-item price before any work starts.
2. 2
   Deck prep and inspection. We remove old shingles down to the deck, pull all nails, and check for soft or rotted plywood. Any bad sheets get replaced and documented with photos.
3. 3
   System build-up. We install Tamko’s underlayment, drip edge, and leak barriers in the order Tamko specifies: eave barrier first, then field underlayment, then valley membrane.
4. 4
   Field shingle installation with a six-nail pattern. On Titan XT and Heritage alike, we nail inside the reinforced zone and use the high-wind nailing pattern Fort Lauderdale’s building code expects.
5. 5
   Flashings, caps, and seals. All metal flashings at chimneys and walls get replaced or re-sealed, ridge caps go on with upsized fasteners, and vent boots get new collars.
6. 6
   Cleanup and documented handoff. We run a magnetic sweep twice, haul everything away, and send you before-and-after photos plus a digital invoice by text. Our 365-Day Done Right Promise is attached to the invoice in writing.

What Tamko Roof Installation Costs in Fort Lauderdale

You’ll see a range below, and here’s the honest part: nobody can price a roof accurately from a satellite photo. The numbers below are what we’ve seen on actual Fort Lauderdale jobs. Your slope count, deck condition, and accessory choices move the price.

• Full Tamko Heritage replacement, 1,500 sq ft single-story: $9,800 – $13,500
• Full Tamko Titan XT replacement, same footprint: $12,400 – $16,900
• Full StormShield underlayment upcharge on either system: $1,800 – $2,600
• Deck replacement per sheet of plywood (if rot found): $110 – $165
• Ridge, flashing, and vent replacement bundle (typical add-ons): $950 – $1,700

Every quote is written and line-itemed before we start. The number on the page is the number on the invoice. Call (754) 354-8628 to schedule a free estimate, and we’ll give you a real number for your roof, not a range from a chart.

Why Fort Lauderdale Homeowners Call Crestview Roofing Co Fort Lauderdale for Tamko Work

We’ll keep it simple. You get a written price before we start, the name and photo of the tech arriving before they pull into your driveway, and a live trackable arrival time through the Relay Standard. After the job, you get before-and-after photos and a digital invoice. Our 365-Day Done Right Promise covers every repair for a full year in writing, and if it fails, the second visit is free, no negotiation. No chasing a contractor. No “the guy’s on his way” for six hours. And if your roof needs a different brand down the road, we install GAF, Owens Corning, and CertainTeed too, so you’re never stuck with one option. If it’s not in writing, it’s not a promise.

FAQs