Owens Corning Roof Installation Nationwide

Owens Corning Roof Installation in Fort Lauderdale: What to Know First

Owens Corning roof installation in Fort Lauderdale typically runs $11,500 to $24,000 for a full re-roof on a standard single-family home, with most jobs taking 3 to 5 working days from tear-off to final inspection. We’re an independent Owens Corning service provider, which means we install their shingle systems but don’t answer to their corporate office; we answer to you. If you’re a Fort Lauderdale homeowner comparing Owens Corning against GAF or CertainTeed, or you already know you want Owens Corning and need a straight price, call us at (754) 354-8628 and we’ll give you a written number before any work starts.

Call (754) 354-8628

How Owens Corning Products Fail – and How We Fix Them

Every shingle brand has its own weak points, and Owens Corning is no exception. Here’s what we see on Fort Lauderdale roofs and what we do about it.

• Duration Series granule loss after severe storms. The Duration line (including Duration FLEX and Duration STORM) uses SureNail technology, but South Florida wind-driven rain can strip granules faster than the manufacturer’s wear charts predict. When we see a Duration roof looking “bald” at year 12, the cause is usually hail or airborne debris from tropical systems, not a material defect. Our fix is a full tear-off and re-install with proper underlayment rated for our wind zone, not a patch job.
• Oakridge shingle cupping in high-humidity attics. Oakridge is Owens Corning’s mid-tier architectural line, and in Fort Lauderdale’s humidity, we see cupping when attic ventilation was undersized at the original install. The shingle edges curl upward, exposing the nail strip to moisture. We address this by correcting ventilation (ridge vents, soffit intake) before laying new shingles, which prevents the same failure from repeating.
• Supreme 3-tab cracking near the eaves. The Supreme line is Owens Corning’s entry-level 3-tab product. In Fort Lauderdale, intense UV exposure on south-facing roof planes can make the tabs brittle and crack at the overhang within 8 to 10 years. The real culprit is often insufficient drip edge or missing starter strip. Our installation includes metal drip edge at every eave and rake, which the original builder may have skipped.
• WeatherLock adhesive bleed-through on low-slope sections. WeatherLock is Owens Corning’s self-sealing ice and water barrier, and on Fort Lauderdale flat or low-slope porch roofs, we occasionally see the adhesive bleed up through lighter-colored shingles in extreme heat. It looks like dark stains but it’s cosmetic, not structural. We flag this before installation on any low-slope section and discuss whether a lighter shingle color or a different underlayment makes more sense for that area.
• Improper nail placement voiding the wind warranty. Owens Corning’s wind warranty (up to 130 mph on Duration STORM) requires six nails per shingle placed in the SureNail strip. We’ve torn off Owens Corning roofs in Fort Lauderdale where the original contractor used four nails or missed the strip entirely, and the homeowner had no idea their warranty was already void. We photograph every nail pattern before we install and document it in your final file.

Our Owens Corning Roof Installation Process

Here’s exactly how an Owens Corning job works with us, from the first call to the final walkthrough.

1. 1
   On-site inspection and written estimate. We walk the roof, measure the squares, check the decking, and document existing ventilation. You get a written, itemized price before we leave, not a verbal ballpark that changes later.
2. 2
   Material selection and order. We help you pick the right Owens Corning line for your budget and wind exposure, then order everything at once so no one’s waiting on a truck mid-job.
3. 3
   Tear-off and deck inspection. We remove the old roofing down to the deck, then check for rotted or warped plywood. If we find damage, we show you photos and get written approval before replacing anything.
4. 4
   Underlayment and flashing. We install synthetic underlayment, replace all flashing (the metal strips that seal joints around chimneys, vents, and walls), and verify the drip edge is seated correctly.
5. 5
   Shingle installation. We follow Owens Corning’s nail pattern and spacing requirements exactly, photographing the nail placement as we go. This is what keeps your wind warranty intact.
6. 6
   Final inspection and documentation. We walk the roof with you or send a photo file showing the finished work, the nail pattern, and the cleanup. You get a digital invoice by text and your warranty paperwork is filed before we leave.

What Owens Corning Roof Installation Costs in Fort Lauderdale

Here’s what you can expect to pay for Owens Corning work in Fort Lauderdale, based on the homes we see from Victoria Park to Rio Vista.

• Full re-roof with Owens Corning Duration: $12,500 to $19,000 for a standard 1,800 to 2,400 square foot home, depending on tear-off layers and decking condition.
• Full re-roof with Duration STORM or FLEX: $14,000 to $22,000, higher because the material runs about 15 to 20 percent more than standard Duration.
• Full re-roof with Oakridge: $11,500 to $17,500 if you want a solid architectural shingle at a lower material cost.
• Partial replacement (one roof plane): $3,200 to $6,500, though we’ll be honest if a partial doesn’t make sense given the roof’s age.

What moves the price: roof pitch (steep roofs cost more in labor), number of existing layers (double tear-off adds hauling and dump fees), decking repairs, and whether your home is in a Fort Lauderdale historic district that requires specific materials. Call (754) 354-8628 for a written quote; estimates are free and the number you get is the number you pay.

Why Fort Lauderdale Homeowners Call Crestview Roofing Co Fort Lauderdale for Owens Corning Work

Dylan Pace and our crew have been installing and repairing Owens Corning systems in Fort Lauderdale for years. We know which Duration colors hold up best under Broward sun, which underlayments actually breathe in our humidity, and how to nail a SureNail strip so the wind warranty means something. We also carry GAF and CertainTeed, so if Owens Corning doesn’t fit your budget or your roof’s spec, we’ll tell you that straight instead of forcing a square peg. Every Owens Corning job includes our 365-Day Done Right Promise: if it’s not done right, we make it right, for a full year, in writing, included at no extra cost. And you’ll always get a written price before any work starts, because if it’s not in writing, it’s not a promise.

FAQs