Boral Roof Installation Nationwide

Boral Roof Installation in Fort Lauderdale: What to Know First

Boral roof installation in Fort Lauderdale typically runs $14,500 to $22,400 for a standard single-family home, and most full installations take 3 to 5 working days. We’re an independent Boral service provider, which means we work on Boral products every month but aren’t bound by manufacturer pricing or schedules. The honest posture is this: we quote a written price before any work starts, and that number doesn’t move unless the home’s decking reveals something nobody could see from the outside. If you own a Boral roof in Fort Lauderdale and you’re weighing installation versus repair, call (754) 354-8628 and we’ll give you a straight answer on both.

Call (754) 354-8628

This page is for homeowners who already have Boral roof products or are considering them, and who want specifics: what fails, what it costs, and what a real installation looks like from first call to final walkthrough.

How Boral Products Fail – and How We Fix Them

Boral makes a range of concrete and composite roof tiles and stone-coated steel panels. In our climate, certain lines develop predictable problems. Here’s what we actually see on Fort Lauderdale roofs.

• Boral concrete tile surface spalling near the ridge. Salt air and heavy summer rain eat at the cured surface of older Boral concrete tiles, especially along ridge caps where runoff concentrates. We see it most on homes within two miles of the Intracoastal. The fix is a selective tile replacement with color-matched pieces, then resealing the ridge line to slow repeat damage.
• Fastener corrosion on Boral stone-coated steel panels. This one surprises people. The panels themselves hold up well, but the original fasteners on installations from the early 2010s were often not rated for coastal salt exposure. Loose or rusted fasteners lead to panel lift in high wind. We replace with marine-grade fasteners and re-torque the full array, panel by panel.
• Underlayment failure beneath Boral tile. A Boral tile roof can look fine from the ground while the underlayment underneath has been quietly failing for years. Florida’s heat plus trapped moisture breaks down older felt underlayment faster than manufacturers expected. When we lift tiles for an installation, we almost always find the underlayment is the real story. We replace it with a synthetic high-temp underlayment before any tile goes back down.
• Cracked Boral concrete tiles from impact, not hail. Fort Lauderdale gets falling coconuts, lawn chairs in hurricane winds, and the occasional golf ball from a nearby course. Boral concrete tiles are strong, but a direct hit cracks them. Cracked tiles let water reach the underlayment faster. We replace broken tiles individually when we can match the profile, or a full section when the damage is widespread.
• Flashing failures where Boral tile meets walls and valleys. This is true of nearly every tile brand, but Boral’s heavier tile profiles put more weight on valley flashing. When a Fort Lauderdale home develops a leak near a chimney or interior valley, it’s usually the flashing metal that failed first, not the tile. Flashing is the metal strips that seal joints around chimneys, vents, and valleys. We replace it with heavier-gauge stock than most original builders used.

Our Boral Roof Installation Process

1. 1
   Call and scheduling. You call (754) 354-8628. A live person answers, we book a time that works for you, and you get a live trackable arrival time through The Relay Standard, so you know exactly when our crew shows up.
2. 2
   On-site assessment. We walk the roof, document every problem area with photos, and check the underlayment and decking condition. Dylan Pace, the owner, reviews every Boral assessment personally before we send pricing.
3. 3
   Written price. You receive a written line-item price before any work starts. That number is the number on the invoice, period. If we discover hidden decking rot during the job, you get photos, a written change order, and approval before we touch it.
4. 4
   Material decisions. For Boral work, we use OEM tiles and panels when the color and profile matter for a cosmetic match, and quality aftermarket underlayment and flashing where they outperform the original spec. We explain the trade-off on every line.
5. 5
   Installation and photo documentation. We tear off, repair decking if needed, lay new underlayment, and install the Boral product. You get before-and-after photos of every section, plus a digital invoice sent by text when the job is complete.
6. 6
   Final walkthrough and written guarantee. We walk the roof with you or review photos together, then hand you a written 365-Day Done Right Promise on the installation. If anything we touched fails within 365 days, we return at no charge.

What Boral Roof Installation Costs in Fort Lauderdale

Here’s what we quote for Boral work in Fort Lauderdale as of 2025. These are real ranges from recent jobs, not national averages.

• Selective concrete tile replacement: $850 to $2,400 depending on tile count and ridge access
• Full underlayment replacement under existing Boral tile: $6,800 to $11,500 for a standard 1,800 to 2,400 sq ft single-story roof
• Complete Boral concrete tile roof installation: $14,500 to $22,400 depending on roof complexity, pitch, and tear-off needs
• Boral stone-coated steel roof installation: $19,000 to $31,000 for a standard single-family home

What moves the price: roof pitch, number of penetrations like skylights and vents, the condition of your existing decking, and whether we’re matching color on an older Boral line that’s been discontinued. The best way to know your number is to call (754) 354-8628 and schedule a free estimate. We’ll give you the written price before any work starts.

Why Fort Lauderdale Homeowners Call Crestview Roofing Co Fort Lauderdale for Boral Work

Most roofing companies can install a Boral product. Few can tell you exactly which Boral line you have, how it fails in Fort Lauderdale’s salt air, and what it should cost before they send a bill. We’ve been doing Boral installation work in Fort Lauderdale for years, and the process is built around visibility. You get a written price before work starts, photo documentation before and after, and a live trackable arrival time so nobody sits around wondering if the crew is lost. If we’re out of a specific Boral tile profile due to a manufacturer backlog, we’ll tell you on the call, not after your old roof is torn off. And while Boral is a strong product, we also work with GAF, Owens Corning, and CertainTeed, so if a different material fits your home and budget better, we’ll say so plainly.

FAQs