Metal roofing
Architectural shingles
Tile roofing
GAF
Owens Corning
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Fast, Reliable Roof Installation Across Oakland Park
Roof installation in Oakland Park, FL typically runs $9,800 to $24,000 for a full shingle re-roof on a mid-century block home, with standing seam metal starting around $18,500 and tile work running $22,000 to $38,000 depending on decking repairs. Those prices reflect what we actually see after tear-off on the 1950s and 60s concrete block homes that dominate this city, where failed underlayment and outdated fasteners are common. We give you a written price before any work starts, not after the old roof comes off. Call (754) 354-8628 and we’ll walk the roof with you, explain what’s there, and hand you a number you can take to the bank.
Oakland Park isn’t a generic roof market. The housing stock here tells a specific story: original barrel-tile roofs on block homes, built-up low-slope sections over carports and additions, and newer infill duplexes with architectural shingles. Understanding which one you have changes the quote, the material choice, and the permit path. That’s the local knowledge you’re paying for.
Why Crestview Roofing Co Fort Lauderdale Is Oakland Park’s Preferred Roof Installation Company
Our Roof Installation team has torn off enough Oakland Park roofs to know what’s under them before the first shingle comes off. When a homeowner calls us about a 1960s block home off Dixie Highway or a 1950s ranch near Royal Palm Park, we already know the likely decking condition, the underlayment era, and whether the city will flag fastener upgrades once the permit is pulled. Our people actually show up on time and do the work that’s written down.
Dylan Pace and our Oakland Park roofing crews work from a simple rule: no surprises on the invoice. That means a written price before materials get ordered, photo documentation of the roof before and after, and digital invoicing you can pull up on your phone. If a covered repair fails within 365 days, we’re back at no charge. In writing, on every job.
Our Oakland Park customers keep us honest the same way your neighbors do: a roofer who leaves a blue tarp flapping on NE 6th Avenue until the insurance adjuster shows up doesn’t get called back. We answer our phones 24/7, and the person who picks up can actually schedule someone.
Styles & brands we work with
Standing Seam Metal Roof in Oakland Park
Standing seam metal roofs make particular sense for Oakland Park homeowners who’ve been through a few hurricane seasons and want a roof that doesn’t rely on sealant or hope. The panels lock together vertically, which means the fastening runs in concealed clips rather than thousands of exposed screw penetrations that the tropical downpours in Broward County will eventually work into leaks. Homeowners off NE 34th Court and near Lloyd Estates often ask about them after watching a neighbor lose shingles in a storm.
A standing seam install on a typical 1,400 square foot Oakland Park home runs $18,500 to $32,000, and that includes removing the old roof, adding a high-temp underlayment rated for metal, and folding the panels on site. It’s not the cheapest option, but for a homeowner planning to stay put, it’s usually the last roof they’ll buy.
When Metal Makes Sense on a Block Home
Concrete block construction holds up fine. The roof deck nailed to it is another story. Standing seam adds weight in a good way: the panel profile and concealed clips make it less likely to peel under uplift than a nail-through shingle. If the decking needs replacement, we address it at the start, not after the metal is cut.
What the Permit Inspector Looks For
Oakland Park inspectors focus on fastening schedules with metal roofs because post-Andrew codes don’t mess around with uplift. When we install standing seam, we prep the permit package with the right clip spacing and panel gauge documented, so inspection doesn’t turn into a phone tag situation.
Tile Roof in Oakland Park
Tile roofs are the original look of Oakland Park’s mid-century neighborhoods, especially the barrel and flat concrete tile on 1950s and 60s block homes along NE 16th Avenue and near Andrews Avenue. When we replace one, we’re not just slapping on new tile and calling it done. We’re checking whether the deck underneath can hold it, whether the underlayment is still watertight, and whether the original fasteners meet current code. Tile is heavy, and old decking deflects.
New tile installation in Oakland Park ranges from $22,000 to $38,000, with the gap driven almost entirely by what’s beneath the old tile and whether the deck needs resheathing. A clean tear-off with solid framing runs low; a termite-weakened deck runs high. We’ll tell you which one you have before we write the contract.
Matching Old Barrel Tile
Homeowners hate losing the curb appeal of an original barrel tile profile. We can source profile-matched tile from manufacturers like Boral to keep the streetscape consistent, and we’ll talk through the option of breathable underlayment systems rated for tile before we commit.
Underlayment Is the Roof
With tile, the underlayment is the waterproofing, not the tile itself. If the original 1950s hot-mopped felt has split and let wind-driven rain soak the decking, no amount of new tile fixes it. We replace the underlayment first, then set the tile.
Trusted Brands We Service in Oakland Park
We install and repair roofing systems from CertainTeed, Owens Corning, and GAF, because these brands engineer for the wind and rain we get in Oakland Park. We keep common profiles and accessory parts stocked so we’re not waiting on a distributor in Fort Lauderdale when a project is mid-tear-off. Whether it’s a low-slope modified bitumen section or a full architectural shingle re-roof, the materials come with manufacturer backing, and the install comes with our 365-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterCommon Roof Installation Problems We See in Oakland Park Homes
- Failed hot-mopped underlayment from the original build. The 1950s felt dries out, splits, and lets Broward’s wind-driven rain soak the deck long before any visible ceiling stain shows. By the time a homeowner notices, the decking is often already soft.
- Decking that deflects once old tile is stripped. Original 1×6 boards nailed with smooth shank fasteners move under foot. Termite damage accelerates it. If the deck bounces, new tile or shingles can’t be installed without full resheathing.
- Outdated wiring for old powered vents. Some 1960s Oakland Park homes still have original turbine or powered vent wiring that shows up after tear-off. That triggers an electrical permit and an electrician callout mid-project, which we account for in the upfront price rather than springing on you later.
- Missing hurricane clips and straps. On a 1962 block home off NE 34th Court, our crew found missing hurricane clips plus water staining across the tongue-and-groove decking after pulling brittle original Boral barrel tiles. We replaced 14 squares of decking, added a full peel-and-stick ice and water shield, installed GAF Timberline HDZ architectural shingles with a ridge vent, and upgraded the framing fasteners to meet current uplift codes before the inspector ever showed up.
Pricing for Roof Installation in Oakland Park, FL
A full architectural shingle re-roof on a standard single-family Oakland Park home runs $9,800 to $17,500. Standing seam metal starts at $18,500 and typically lands between $22,000 and $32,000. Tile runs $22,000 to $38,000 with decking repairs being the biggest variable. If the city’s re-roof permit triggers fastener verification and the deck needs resheathing, that’s $2,800 to $5,200 in additional labor and materials depending on square footage. We don’t play change-order games. We write allowances into the contract, show you photos of what’s under the old roof, and get written approval before any additional work happens. Call (754) 354-8628 for a free estimate, and we’ll give you the real numbers for your specific home.
We Also Serve Cities Near Oakland Park
If you’re just outside Oakland Park, we still cover your roof. Our crews work throughout Fort Lauderdale, Davie, Lauderhill, and Coconut Creek, so a home in Wilton Manors or near the Oakland Park line gets the same written pricing and photo documentation as anyone else. See our full Roof Installation in Oakland Park coverage for details on scheduling and local response.
Serving Oakland Park, FL - Our Local Coverage Area
We’re based in the Oakland Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Roof Installation in Oakland Park
Yes. Oakland Park code requires a re-roof permit to trigger verification that the existing roof deck is fastened to current uplift standards. Many 1950s concrete block homes have original 1×6 decking nailed with 8d smooth shank nails that fail under post-Andrew wind loads, and the inspector will not sign off until fasteners are upgraded. We build that upgrade into the quote from the start, so it’s not a surprise. Call (754) 354-8628 and we’ll check your deck fastening during the free estimate.
You don’t have to switch to shingles. We source profile-matched barrel tile from manufacturers like Boral so the roofline keeps the mid-century Oakland Park character, and we’ll write the underlayment and attachment to current code. The old brittle Boral barrels get replaced with new tile rated for Broward County wind, and the deck underneath gets repaired before anything goes back down. Call (754) 354-8628 for a free estimate and we’ll put a tile sample on your roof so you can see the profile before you commit.
Low-slope sections in Oakland Park need a material that handles standing water and tropical downpours, and modified bitumen or a peel-and-stick membrane system is usually the right call. The original built-up roofing from the 1950s and 60s often has dried, split hot-mopped underlayment beneath it, and once that’s open, we can inspect the deck and address any rot before the new membrane goes down. We write this into the permit package so the inspector sees the underlayment spec and the fastening schedule up front. Call (754) 354-8628 for exact pricing on your low-slope section.
We write an allowance into the contract for unforeseen decking, fascia, and soffit work before we ever tear off a single shingle. If we open the roof and find damage, you get photos, a written price for the exact scope, and nothing happens until you approve it. No one holds a roof hostage for a change order. That’s part of the Relay Visibility Guarantee, and it’s the reason Oakland Park homeowners don’t get the ballooning quote at the door. Call (754) 354-8628 to schedule a free estimate.
Shingle roofs in Oakland Park should be installed to meet Broward County’s current high-velocity hurricane zone requirements, which typically means a wind rating of 130 mph or higher depending on exposure. The nailing pattern matters more than most homeowners realize: six nails per shingle in the right locations, not the four-nail minimum, plus correct ring-shank fasteners into wood decking. When we install CertainTeed or Owens Corning shingles, we document the fastening pattern for the inspector and the warranty file. Call (754) 354-8628 to get your wind-rating questions answered for your specific street and roof pitch.
Written by Dylan Pace, Owner at Crestview Roofing Co Fort Lauderdale, serving Oakland Park with the Relay Visibility Guarantee: written prices, photo documentation, and a live trackable arrival time on every job.