Boral Roof Repair Nationwide

Boral Roof Repair in Fort Lauderdale: What to Know First

Boral roof repair in Fort Lauderdale typically runs $350 – $900 for most leak and flashing fixes, with full shingle replacement work ranging higher depending on the roof’s age and pitch. We’re an independent Boral service provider, meaning we repair Boral stone-coated steel and clay tile systems without being tied to the manufacturer’s schedule or labor rates. Most Boral repairs we do are completed in one visit because we stock the common failure parts before we arrive.

Call (754) 354-8628

If you own a home with a Boral roof in Fort Lauderdale and you’ve got a leak, a cracked tile, or flashing that’s pulling away, this page tells you exactly what’s happening, what it costs, and how we fix it. Call (754) 354-8628 and a live person answers, any hour.

How Boral Products Fail – and How We Fix Them

• Stone-coated steel panel lifting at the lap joint (Boral Steel, Cascade, and Mission lines). Fort Lauderdale’s daily thermal expansion works the fasteners loose over a decade or so. The panel edges start to lift, then wind-driven rain sneaks under the lap. We reseat the panel, replace the fasteners with the correct gauge, and seal the lap to manufacturer spec. Patching over the gap without reseating is the shortcut we won’t take.
• Concrete tile cracking from impact or foot traffic (Boral Tile, Madera, and Sonoma profiles). A fallen palm frond or a previous contractor walking the valley wrong fractures the tile. Water sits in the crack and bleeds into the underlayment. We pull the broken tile, inspect the underlayment beneath, and replace the tile with a color-matched Boral piece whenever it’s still in production. If the line’s discontinued, we source a quality aftermarket match and note the deviation in your written quote so it’s never a surprise.
• Flashing failures at headwall and chimney transitions. Boral’s heavier profiles need deeper flashing than asphalt shingle. When a previous crew used standard-profile step flashing, it doesn’t reach high enough behind the tile, and water gets driven sideways in a coastal storm. We cut out the old flashing, install taller step flashing and counterflashing, and reseal with a urethane caulk that holds up to salt air. This is the most common Boral repair we do in Fort Lauderdale east of Federal Highway.
• Valley and hip clip corrosion near the ocean. Salt spray eats the metal clips that hold Boral’s ridge and valley pieces. Once the clips corrode, the tiles shift and expose the fasteners. We replace the clips with stainless and reset the tile. It’s a parts-and-labor fix that runs $400 – $700 depending on how many valleys are involved.
• Underlayment breakdown after decades of Fort Lauderdale humidity. Boral’s stone-coated steel and tile are engineered to last, but the underlayment beneath has a shorter life. When the underlayment fails, leaks show up even though the Boral surface looks fine from the ground. We diagnose this with a moisture reading and a targeted water test, then give you a straight answer: localized underlayment repair or a full re-flash of the affected slope.

Our Boral Roof Repair Process

1. 1
   You call, a person answers. No voicemail loop. We ask what you’re seeing, then we schedule a specific arrival time, not a four-hour window.
2. 2
   We diagnose before we quote. A tech walks the roof, takes photos, and identifies the exact failure point. You get before-and-after photos of everything we touch via The Relay Standard.
3. 3
   Written price before any work starts. You approve the line-item quote on your phone. The number on the page is the number on the invoice. No change orders unless we find something hidden and you approve it in writing.
4. 4
   Parts decision made with you. If Boral OEM parts are available and budgeted, we use them. If a discontinued profile calls for a quality aftermarket match, we tell you before we order. You decide; we document.
5. 5
   Repair, test, and clean up. We fix it, water-test the repaired area, photograph the finished work, and leave the site clean.
6. 6
   Written guarantee, every time. Every Boral repair carries our 365-Day Done Right Promise: if it fails within a year, we return and fix it at no charge.

What Boral Roof Repair Costs in Fort Lauderdale

Most Boral repairs in Fort Lauderdale fall into these ranges:

• Single cracked tile replacement: $250 – $450
• Flashing reseal or replacement at one penetration: $350 – $650
• Valley or hip clip replacement with stainless: $400 – $700
• Localized underlayment repair under 3 – 5 tiles: $600 – $900
• Full slope re-flash and underlayment replacement: $1,800 – $3,500 depending on pitch and square footage

What moves the price: roof pitch (two-story tile work is slower), how many failed areas we find once the tiles come up, and whether your Boral profile is still in production. We don’t pad the quote to cover surprises; we document what we see and show you photos before we ask for a dollar. Call (754) 354-8628 for an exact written quote.

Why Fort Lauderdale Homeowners Call Crestview Roofing Co Fort Lauderdale for Boral Work

Dylan Pace grew up in Los Angeles, got his roofing fundamentals at Los Angeles Trade-Technical College, and has spent the better part of two decades on residential roofs before bringing that experience to Fort Lauderdale. He runs Crestview Roofing Co Fort Lauderdale with a simple rule: if it’s not in writing, it’s not a promise. Every Boral repair we do carries the full Relay Standard – written price before work begins, before-and-after photos, a live trackable arrival time, and a digital invoice sent by text. And because we also work with GAF, Owens Corning, and CertainTeed systems daily, we understand how Boral interfaces with other materials when that matters.

Every repair is covered by our 365-Day Done Right Promise, in writing, included with every job. That means a free second visit if the repair fails within a year. No negotiation, no runaround.

FAQs