Tamko Shingle Repair Nationwide

Tamko Shingle Repair: The Fort Lauderdale Owner’s Guide

Tamko shingle repair in Fort Lauderdale typically runs $350 – $750 for a standard repair area of 100 square feet or less, and we can usually get a crew to your home the same week you call. Most Tamko owners discover a problem the same way: a shingle tab flapping in the breeze after a storm, a dark water stain creeping across the ceiling, or granules collecting in the gutter after every rain. The good news is that Tamko shingles are still being made, which means color-matched replacements are available, but getting the exact match right takes more than a quick glance at the roof.

Call (754) 354-8628

We stock Tamko repair materials on our trucks and have been fixing roofs across Fort Lauderdale for years. This page covers exactly what a Tamko repair involves, what it costs, and how to tell whether you need a patch job or something bigger. If you want a written price before any work starts, call (754) 354-8628.

Which Tamko Models This Applies To

Tamko has three main shingle lines you’ll find on Fort Lauderdale roofs: the Heritage series (their standard architectural shingle), the Elite Glass-Seal series (a step up with a wider color range), and Heritage Premium (heavier-weight architectural shingles rated for higher wind zones). Most homes in Broward County built in the last 15 years have one of these three. We also handle their older 3-tab line, the Glass-Seal 3-Tab, though fewer of those are left on roofs here because they don’t hold up as well to Florida storms.

Here’s the part most homeowners don’t know: Tamko discontinued certain color blends over the years. If your roof is 10+ years old, there’s a real chance the exact shade you need – say, a specific weathered-wood tone from the 2012 Heritage line – is no longer produced. When that happens, we source close-match lots from Tamko’s current Heritage colors and do a blended repair so the patch doesn’t read as an obvious square from the street. Identifying your exact product takes two things: the manufacturer label on a leftover bundle in your garage or attic, and the lot number sometimes printed on the shingle packaging. If you don’t have either, we measure the shingle’s exposure and check its dimensions against Tamko’s spec sheet, which is usually enough to narrow it down.

One compatibility gotcha specific to Florida: some Tamko roofs installed before 2015 used a nail pattern that doesn’t meet current Miami-Dade wind-load standards for the shingle’s current warranty. That doesn’t mean the roof is unsafe – it means a repair in that section should use the same pattern to stay visually consistent, and we always confirm this before we start.

Signs Your Tamko Shingles Are Failing

• Granule loss in the gutter or at downspout outlets. Tamko shingles shed a small amount of granules when new, but steady accumulation in the gutter – not just a few flecks following installation – means the shingle surface is breaking down. On a Fort Lauderdale roof, UV exposure and salt air accelerate this, especially on south-facing slopes.
• Flapping or lifted tabs after a storm. The sealant strip on any shingle line, Tamko included, loses tack over time. Once a tab lifts, wind gets under it and pulls at the nails. You’ll hear it first: a faint clacking sound in high wind that wasn’t there in years past.
• Dark stains or soft spots on the ceiling, especially near the roof edge or a valley. By the time water shows up indoors, it has already worked through the shingle layer, the underlayment, and the decking. The visible stain is usually a few feet from the actual entry point, which is why we inspect the whole slope, not just the wet spot.
• Curling at the edges of individual tabs. Florida heat does this more than any other single factor. Tamko shingles curl when the asphalt core dries out and the mat loses its flexibility. A few curled tabs is repairable. Curling across a full section usually means replacement is coming sooner than later.
• Brittle or cracked shingles you can see from the ground. If the shingles look like they’d snap if you tried to bend them, the roof is past the point of patch repairs in that area. We’d quote you for a section replacement rather than a quick fix, and we’d put the reasoning in writing.

Replacement Cost & What’s Included

In Fort Lauderdale, a standard Tamko shingle repair – meaning a small section under roughly 100 square feet with underlayment and sealant – runs $350 – $750 installed. The spread comes down to roof pitch, accessibility (a two-story hip roof costs more than a one-story ranch), and how many shingle bundles are needed. A steeper roof requires extra safety equipment and slow, careful work; that labor is reflected honestly in the price.

Here’s what that price always includes at Crestview Roofing Co Fort Lauderdale: a written line-item quote before any work begins, color-matched Tamko shingles (or the closest current-production match if your original is discontinued), new underlayment where needed, replacement fasteners, and a full cleanup of old materials from your property. Every repair carries our 365-Day Done Right Promise – if the repair fails within a year, we return and fix it at no charge. No negotiation, no phone tag, no “that’s a different problem now.” If it’s not in writing, it’s not a promise.

DIY or Call Us?

What an owner can safely do: clear the gutters to check for granule buildup, take photos of any visible damage to share with us, and check inside the attic for water stains after a storm. All of that is useful and safe, and it gives us a head start before we arrive. What you should not do: climb onto a roof anywhere in Fort Lauderdale without fall protection and a proper anchor system. Tile and asphalt shingle roofs get slick after rain, and most DIY injuries we hear about start with “I was just going up for a quick look.” A roof repair also has a hidden problem – water often travels several feet from the actual entry point, so the damage you can see from a ladder is rarely the whole story.

If the fix is isolated to one or two shingles and you already have matching Tamko shingles stored in the garage, it’s worth a conversation with us anyway – we’ll quote the labor honestly and tell you whether a full-truck visit makes sense for that small of a job. Call (754) 354-8628 and we’ll give you a straight answer, plus a written price if the job makes sense.

FAQs