A Crestview company - serving Fort Lauderdale, FL

IKO Roof Replacement Nationwide

Metal roofingMetal roofing
Architectural shinglesArchitectural shingles
Tile roofingTile roofing
GAFGAF
Owens CorningOwens Corning
Flat & low-slopeFlat & low-slope
Every visit starts with

Free roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation

Your new roof for as low as$159/month*On approved credit; ask for current terms
Get your free estimate

IKO Roof Replacement in Fort Lauderdale: What to Know First

We provide independent IKO roof replacement in Fort Lauderdale, typically completing a full single-family re-roof in 3 to 5 working days depending on decking condition and weather. Most IKO architectural shingle replacements in this market run between $9,800 and $16,400 for a 1,800 to 2,400 square foot roof, with the price locked in writing before the first shingle comes off. If you own an IKO roof that’s reaching the end of its service life or showing signs of premature wear, this page addresses the real questions: what fails on IKO products here in South Florida, what replacement actually costs, and how we handle the job so you know exactly what’s happening at every step. Call (754) 354-8628 when you’re ready for a walk-through and a line-by-line replacement estimate.

Call (754) 354-8628

How IKO Products Fail – and How We Fix Them

IKO shingles carry a solid reputation, but twenty-plus years of South Florida roof tear-offs have taught us exactly where they weaken first. Here are the failure modes we see most often on IKO roofs in Fort Lauderdale:

  • IKO Cambridge granule loss within the first 10 years. The Cambridge line is IKO’s most popular architectural shingle, and on Fort Lauderdale roofs it tends to shed granules faster than some premium competitors due to the combination of intense UV exposure and daily thermal cycling. Once the granules go, the asphalt beneath oxidizes and the shingle loses its weatherproofing. Our fix: we inspect granule loss across multiple slopes, map the worst zones, and when replacement is warranted, we usually step homeowners up to a heavier-rated architectural shingle with better granule adhesion for our climate. Sometimes that means staying within IKO’s lineup; sometimes it means showing you what GAF or Owens Corning offers at the same or better price point.
  • IKO Dynasty sealant strip failures after wind events. Dynasty is IKO’s larger-format architectural shingle with a wider nailing zone, but we’ve torn off Dynasty roofs in Broward where the factory-applied sealant strips had started to let go along the rake edges after a few hurricane seasons. The tabs lift, wind catches them, and you lose shingles in bands. Our fix: we don’t just replace the missing tabs. We check the nailing pattern on the remaining field – Fort Lauderdale code requires six nails per shingle in high-wind zones – and when we replace an IKO roof, every shingle gets the full high-wind nailing schedule, regardless of what the original installer did.
  • IKO Marathon edge curling on low-slope sections. Marathon is IKO’s three-tab shingle, and on Fort Lauderdale homes with low-slope or partially shaded roof planes, those tabs absorb moisture and curl at the corners like an old book. Curled tabs catch wind and create water entry points. Our fix: when we see Marathon curling, we check the attic ventilation first, because trapped heat and moisture accelerate the curl. On a replacement, we’ll often convert the low-slope sections to a peel-and-stick underlayment with a modified bitumen or standing seam detail instead of shingles, because three-tab simply doesn’t belong on a 2:12 pitch in this humidity.
  • IKO Nordic algae streaking and granule etching. Nordic is IKO’s performance architectural line, often sold with an algae-resistant granule blend. The reality on Fort Lauderdale roofs: our humidity and tree canopy coverage feed algae growth even on algae-resistant shingles, and over time the streaking etched into the granules can become permanent staining. Our fix: full replacement removes the staining problem entirely, and we spec a heavier algae-resistant architectural shingle with copper-infused granules, whether from IKO or another manufacturer, and pair it with ridge venting that keeps the roof deck dryer.
  • IKO flashing failures at Fort Lauderdale’s chimney and wall intersections, not shingle failures. Here’s the detail most homeowners never suspect: on many IKO roof replacements around the Las Olas corridor, the shingles themselves have years of life left, but the step flashing installed at the time of the original build was never replaced when the first re-roof went on. Fort Lauderdale’s salt air eats galvanized flashing at the fasteners, and once the flashing goes, water travels behind the shingles and into the deck. Our fix: every IKO replacement we do includes all-new flashing – step, counter, chimney, and wall – and we document every flashing installation with a photo before it’s covered, so you have proof the detail that fails most often was done correctly.
Explore

Styles & brands we work with

Architectural shingles
Architectural shingles
Metal roofing
Metal roofing
Tile roofing
Tile roofing
GAF
GAF
Owens Corning
Owens Corning
Flat & low-slope
Flat & low-slope

Our IKO Roof Replacement Process

Here’s what an IKO roof replacement with Crestview Roofing Co Fort Lauderdale actually looks like, from your first call to the final walk-through:

  1. 1
    The on-site inspection. We walk every slope, pull the report, and check three things on an IKO roof: shingle condition, deck integrity, and attic ventilation. If you have a specific concern – a leak, a lifted section, missing granules in the gutters – we start there.
  2. 2
    The written scope. Before any work starts, you get a written line-item estimate. It includes the shingle model we’re recommending (with IKO, GAF, Owens Corning, and CertainTeed all on the table), the underlayment, the decking replacement allowance, and the flashing scope. The number on that sheet is the number on the final invoice.
  3. 3
    Materials staged and decking inspected. On tear-off day, the old shingles come off and the deck check happens. If we find rotted or delaminated wood – common in Fort Lauderdale where decking was nailed with ungalvanized fasteners decades ago – we replace it in writing at a per-sheet price you already approved.
  4. 4
    Installation to IKO specs plus our own. We install to the manufacturer’s published nailing and exposure requirements, plus Fort Lauderdale’s high-wind code provisions. Every flashing detail is custom-cut on site, never re-used from the old roof.
  5. 5
    The documentation pass. Before the final ridge cap goes on, we photograph the underlayment, the flashing, and the nail pattern, so you see what’s under the shingles. You’ll get before, during, and after photos texted to you.
  6. 6
    The cleanup and guarantee. We magnet-sweep the property for nails and debris, walk the roof with you, and hand you the written guarantee – 365 days on every repair, in writing, included with every job. If something fails within that year, we come back at no charge.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What IKO Roof Replacement Costs in Fort Lauderdale

For an IKO roof replacement in Fort Lauderdale, real numbers help more than vague talk. Here’s the range we quote most often, based on actual jobs in Broward County:

  • IKO Cambridge full replacement, 1,800 – 2,200 sq ft: $9,800 – $13,500 (tear-off, underlayment, architectural shingle, new flashing, and cleanup)
  • IKO Dynasty full replacement, 2,000 – 2,600 sq ft: $12,400 – $16,400 (larger-format shingle, high-wind nailing, ridge vent, and decking allowance)
  • IKO Nordic full replacement, 1,700 – 2,300 sq ft: $11,200 – $15,200 (performance architectural, upgraded algae resistance, reinforced underlayment)
  • Decking replacement per 4×8 sheet: $82 – $110, dependent on thickness and code-tier plywood or OSB required
  • Standing seam conversion for low-slope sections alongside shingles: $11 – $16 per square foot, depending on panel gauge and roof complexity

What moves the price on an IKO replacement in Fort Lauderdale? Roof access, story height, the number of penetrations (vents, skylights, pipes), and whether the current decking meets modern hurricane code. Homes near Las Olas with castle-style or steep-pitch sections cost more. The price you get in writing is the price you pay – no change orders, no surprise add-ons at delivery. Call (754) 354-8628 for an exact quote. Estimates are free.

Why Fort Lauderdale Homeowners Call Crestview Roofing Co Fort Lauderdale for IKO Work

We’re an independent IKO service provider, not a manufacturer-authorized dealer, which means we’re free to tell you the truth about your specific roof – whether the right answer is an IKO replacement or a better-suited product from GAF, Owens Corning, or CertainTeed. Every IKO job we do runs on The Relay Standard: a written price before work starts, before-and-after photos, a live trackable arrival time, and a digital invoice sent by text. Our technicians are background-checked and uniformed, so you know exactly who is pulling up. If it’s not in writing, it’s not a promise – that’s how Dylan Pace and our crew have operated in Fort Lauderdale for years, from residential re-roofs near the beach to storm-damage repairs across the broader Broward corridor. A live person answers our phones 24/7, and our 365-Day Done Right Promise covers every repair for a full year, including a free second visit if something fails. Call (754) 354-8628 and Dylan will tell you upfront what your IKO roof actually needs, with every timeline and warranty item written down before a single nail goes in.

FAQs

Need Roofing help in Fort Lauderdale? Licensed & insured · Written quotes before work starts response · free estimates
Call (754) 354-8628
Local Service Coverage

Request a Free Estimate in Fort Lauderdale

Tell us what you need - Crestview Roofing Co Fort Lauderdale responds fast. No obligation.

When you send us your details, you agree to the terms of our Privacy Policy and agree that you may be contacted by phone, text, or email regarding your project, including by the service partners who may complete the work.

Prefer to text? Text Us
Call Now - 24/7 Dispatch