Owens Corning
Architectural shingles
Metal roofing
Tile roofing
GAF
Flat & low-slopeFree roof inspection with deck photos before we talk money - GAF and Owens Corning certified installation
Owens Corning Gutter Replacement: The Fort Lauderdale Owner’s Guide
If your Owens Corning gutters are pulling away from the roofline, leaking at the seams, or sagging between hangers, replacement sections or a full gutter run typically costs $850 to $2,400 installed in Fort Lauderdale. We stock Owens Corning-compatible aluminum gutter profiles and can usually complete a standard single-story replacement in one visit. Most homeowners notice the problem during a heavy afternoon downpour, when water cascades over the gutter lip instead of flowing to the downspout, or when they spot rust blooms and fasteners popping loose along the fascia board.
Key Takeaways:
- Owens Corning gutters fail most often at seam separations and hanger pullout after years of Florida sun and storm cycles.
- Installed replacement pricing in Fort Lauderdale ranges from about $850 for a partial run to $2,400 for a full gutter system on a typical single-story home.
- The written quote we hand you before any work starts is the invoice total. No change orders written in the driveway.
- Our 365-Day Done Right Promise covers the entire replacement, in writing, at no extra cost.
Which Owens Corning Models This Applies To
Owens Corning has manufactured several gutter and rain-removal product lines over the years, including their K-style aluminum gutters in 5-inch and 6-inch profiles and their older vinyl gutter systems that were paired with roofing packages in the 1990s and early 2000s. The most common Owens Corning gutter we replace in Fort Lauderdale is the 5-inch K-style aluminum profile, which matches the standard hanger spacing and downspout sizing used across Broward County homes.
Here is the compatibility gotcha most owners miss: Owens Corning gutters installed as part of a full roofing system often use hidden hangers that clip to the roof edge at a specific angle. If the hanger style is not matched correctly, the new gutter section will sit slightly off-pitch, and water will pool instead of draining. We match the hanger type and gauge to the existing Owens Corning profile before we cut a single section. For owners considering a switch, OEM Owens Corning gutter components are reliable when available, but quality aftermarket aluminum in the same gauge and profile performs equally well and typically costs 15 to 20 percent less. We will show you both price lines and let you choose.
Styles & brands we work with






Signs Your Owens Corning Gutter Replacement Is Failing
- Water pouring over the gutter edge during storms. This usually means the gutter pitch has shifted, often because hangers have pulled free from rotted fascia board. A replacement section re-pitched correctly solves it.
- Sagging or bowing between hangers. Aluminum gutters expand and contract in Fort Lauderdale’s heat, and over time the hanger screws loosen. Tightening them is a stopgap; replacing the section with properly spaced hangers is the fix.
- Rust blooms or pinhole leaks along the bottom channel. Coastal air accelerates corrosion. Once pinholes appear, patching buys you months, not years.
- Visible gaps at the seams where gutter sections meet. Florida’s frequent heavy rain exposes seam failure fast. Replacing the separated section is almost always cheaper than resealing it twice a year.
- Staining or streaking on the fascia board or exterior wall. Water escaping behind the gutter rots the wood it is mounted to. By the time you see streaks, the fascia usually needs inspection too.
See the difference
Before
After
Before
After
Before
AfterReplacement Cost & What’s Included
In Fort Lauderdale, expect to pay roughly $850 to $1,600 to replace a single 20-to-30-foot gutter run on a one-story home, including materials, removal of the failed section, hangers, and labor. A full gutter replacement around a typical single-story house lands between $1,700 and $2,400. Two-story homes run higher because of ladder access and safety setup time.
What moves the price: gutter profile width (6-inch runs cost more than 5-inch), linear footage, whether fascia board needs repair first, and how many downspouts have to be reconnected. Every quote we give in Fort Lauderdale is a written line-item price delivered before any work starts. The number on the page is the number on the invoice. Our 365-Day Done Right Promise covers the replacement gutter, hangers, and labor for a full year, in writing, included with every job. Call (754) 354-8628 for an exact quote, free.
DIY or Call Us?
You can safely inspect your Owens Corning gutters from the ground with a pair of binoculars. Look for sagging sections, gaps at the seams, and rust streaks. What you should not do is climb a ladder against a rain-slick roofline and attempt to pull a failed gutter section while balancing a drill. Gutter replacement looks simple, but a 20-foot section of waterlogged aluminum shifts quickly, and the fall is never worth the savings.
There is also the matter of pitch. A gutter that slopes even a quarter-inch wrong across ten feet will hold water and breed mosquitoes, which Fort Lauderdale needs no help with. We bring the right hangers, set the pitch with a level, and document the before-and-after with photos. If the replacement fails within 365 days, the second visit is free, no negotiation. Call (754) 354-8628, and we will give you a written price before anything is removed.
FAQs
Aluminum Owens Corning gutters in Fort Lauderdale typically last 15 to 20 years, though coastal salt air can shorten that to 12 to 15 years within a few miles of the ocean. Vinyl versions fail much sooner in Florida heat, often in 8 to 10 years. Call (754) 354-8628 if you are not sure which material you have.
A single rust pinhole or a tight seam gap can sometimes be sealed, but sagging sections, separated seams, or hanger pullout almost always justify replacement. Sealing a separated seam on a 15-year-old gutter usually buys less than a year before the next seam opens. Call (754) 354-8628 for an honest assessment and a written price either way.
Replacing one 20-to-30-foot run on a single-story Fort Lauderdale home takes about two to three hours. A full gutter system around an average home is usually a one-day job. We will give you a live trackable arrival time through The Relay Standard, so you know exactly when our crew pulls up.
We stock 5-inch and 6-inch aluminum K-style gutter sections, hangers, end caps, and downspout elbows in standard colors on our trucks serving Fort Lauderdale. Since Crestview Roofing Co Fort Lauderdale is an independent service provider and not affiliated with Owens Corning, we match OEM specifications and also carry quality aftermarket equivalents. We also stock compatible gutter profiles for homes with GAF or CertainTeed roofing systems. Call (754) 354-8628, and we will confirm we have your color and profile before we head out.
If your Owens Corning gutters are failing, get a written price before anyone touches the ladder. Dylan Pace and the crew at Crestview Roofing Co Fort Lauderdale will quote the job in writing, arrive when we say we will, and stand behind the work for 365 days. Call (754) 354-8628 to schedule your free estimate.
Written by Dylan Pace, Owner, Crestview Roofing Co Fort Lauderdale at Crestview Roofing Co Fort Lauderdale, serving Fort Lauderdale and nearby areas.